Quick overview: Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm stainless steel stem, length 17.5 mm. For tool measurement on turning machines. Previous part number: 21.00-WM17.5
Quick overview: 5-way stylus center made of stainless steel, with external thread M4 for holding up to 5x M4 styli, length 15 mm. Previous part number: 91.00-TK15X15X15-M4
Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø2.8 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-T13/6-ST-M3
Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø4 mm, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3
Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'
Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 10 m / 32.8'
Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'
Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'
Calibration set with calibration sphere (D = 40 mm) and magnetic base for mounting on the machine tool. Content see description.
Previous part number: 3D-FI EICHKUGEL SET5
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET3
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET2
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET1
Calibration set with calibration sphere (Ø 30 mm), extensions, magnetic base and T-nuts for mounting on the machine tool. Set content see description.
Previous part number: 3D-FI EICHKUGEL SET6
