Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded, drag chain capable with 90°-plug M12/F08 and open wires. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded, drag chain capable cable with M23/F12 plug and open wires. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'
Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool.
