Bewerkingsmachine

Universal connecting cable to transmit measuring signals from Hexagon receivers to Mitsubishi controls. Shielded cable with 3M 10120-3000PE plug and open wires. Length: 6 m / 19.7'

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X12. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 4 m / 13.1'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 5 m / 16.4'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 1 m / 3.3'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 3 m / 9.8'

Adapter cable with 90°-plug M12/F08 and M12/M08 plug. Length: 0.3 m / 1'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 5 m / 16.4'

Horizontal mounting holder for installing the radio-wave receiver RWR95.40 inside the machining area.

Rotating / pivoting holder for the m&h infrared receiver IRR91.42. It enables flexible positioning within the machine tool's machining area and ensures optimal signal transmission and reliable communication.

Quick-release Clamping Ring

Taper shank CAT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Adapter from D11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D11 connection.

Taper shank SK40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Plastic mounting key for locking/unlocking the battery cover for battery replacement on m&h touch probes IRP40.42, IRP40.02 and TP‑R‑400.

Replacement Service Cover for the m&h Infrared Touch Probe IRP40.02. Provides access to internal components for maintenance and service operations while protecting the probe interior from dust and damage.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Cylindrical tool holder for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.