text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  1 220,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1 565,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  987,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-70SS3
  • Diamètre extérieur du mandrin (D1):  70
  • Plage de serrage extérieur (A):  1 - 71
  • Plage de serrage intérieur (I):  18 - 66
  • Matériau:  Acier inoxydable
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prijs:  1 140,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prijs:  1 490,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prijs:  3 300,00 €
Beknopt overzicht:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3-NF
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  1 004,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  33,00 €
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  47,00 €
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  279,00 €
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Référence:  FV-GUIDE480
  • Plaque adaptable:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  € 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  € 819,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  € 39,00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Référence:  FV-LATSML
  • Longueur:  10 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prijs:  € 1.061,00
Beknopt overzicht:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-BRONZE/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  € 10,00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/25
  • Longueur:  25 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prijs:  € 18,00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FV-SOSUP
  • Longueur:  6 mm
  • Diamètre:  8 mm
Op voorraad - verzending 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  € 594,00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Référence:  FV-BP200/200P
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  € 1.955,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/600
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Centering Pin
Centering Pin
ID: FV-MALE
Prijs:  € 24,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Référence:  FV-MALE
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen