text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Prezzo:  480,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Tempi di consegna 10-15 Giorni
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Prezzo:  560,00 CHF
Descrizione:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Tempi di consegna 10-15 Giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  1 004,00 CHF
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  33,00 CHF
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  47,00 CHF
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Prezzo:  1 420,00 CHF
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160SS3-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de serrage extérieur (A):  1 - 150
  • Plage de serrage intérieur (I):  34 - 174
  • Matériau:  Acier inoxydable
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prezzo:  1 140,00 CHF
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Tempi di consegna 10-15 Giorni
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prezzo:  1.490,00 CHF
Descrizione:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6-NF
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation (G):  M6
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Prezzo:  3.300,00 CHF
Descrizione:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-240AL3-NF
  • Diamètre extérieur du mandrin (D1):  240
  • Plage de serrage extérieur (A):  1 - 288
  • Plage de serrage intérieur (I):  35 - 295
  • Matériau:  Aluminium
Tempi di consegna 10-15 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prezzo:  1.140,00 CHF
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Tempi di consegna 10-15 Giorni
Standoff Adjustable (M8)
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prezzo:  62,00 CHF
Descrizione:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Référence:  FX-HEIGHT
  • Longueur:  50 mm
  • Diamètre:  16 mm
Disponibile - Spedizione in 1-2 Giorni
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Prezzo:  418,00 CHF
Descrizione: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Tempi di consegna 10-15 Giorni
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Prezzo:  474,00 CHF
Descrizione: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-I
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Tempi di consegna 10-15 Giorni
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Prezzo:  364,00 CHF
Descrizione: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Référence:  FC-JS-70SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Tempi di consegna 10-15 Giorni
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Prezzo:  418,00 CHF
Descrizione: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Référence:  FC-JS-125SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Tempi di consegna 10-15 Giorni
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Prezzo:  474,00 CHF
Descrizione: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Référence:  FC-JS-160SS3-E
  • Matériau:  Stainless Steel, vacuum-hardened, ground
Tempi di consegna 10-15 Giorni
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Prezzo:  730,00 CHF
Descrizione: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Référence:  FC-JS-125AL6-IE
  • Matériau:  Aluminium, hard anodised
Tempi di consegna 10-15 Giorni
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Prezzo:  830,00 CHF
Descrizione: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Référence:  FC-PS-125AL6
Tempi di consegna 10-15 Giorni
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Prezzo:  940,00 CHF
Descrizione: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Référence:  FC-PS-160AL6
Tempi di consegna 10-15 Giorni
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Prezzo:  1.020,00 CHF
Descrizione: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Référence:  FC-JS-240AL3-I
  • Matériau:  Aluminium with hard coated surface
Tempi di consegna 10-15 Giorni