text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  1.220,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  1.318,00 €
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Precio:  1.565,00 €
Descripción rápida:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160AL6
  • Diámetro exterior mandril (D1):  160
  • Area de fijación:  5 - 196
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Precio:  3.715,00 €
Descripción rápida:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  1.565,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  987,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  930,00 €
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  1.140,00 €
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Precio:  1.490,00 €
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160AL6-NF
  • Diámetro exterior mandril (D1):  160
  • Area de fijación:  5 - 196
  • Material:  Aluminio
  • Fijación (G):  M6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  940,00 €
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Precio:  1.020,00 €
Descripción rápida: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Referencia:  FC-JS-240AL3-I
  • Material:  Aluminium with hard coated surface
Tiempo de entrega 10-15 días
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Precio:  364,00 €
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 160 Inside/Outside Clamping Set (AL)
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Precio:  1.040,00 €
Descripción rápida: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.
  • Referencia:  FC-JS-160AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Reversible Top Jaw Set for Inside/Outside Clamping
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Precio:  1.120,00 €
Descripción rápida: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.
  • Referencia:  FC-JS-240SS3-IE
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  5.756,00 €
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Referencia:  GB0096-2001
  • Compatibilidad CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Entrega > 25 días
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Precio:  8.550,00 €
Descripción rápida: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Referencia:  GB0122-1000
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Entrega > 25 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  47,00 €
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  50,00 €
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  18,00 €
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/20
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  84,00 €
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Referencia:  FX-PR30HINGE
En Stock - Envío 1-2 Días