Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
ID: FV-BP200__200P
Price:  €594.00
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200P
  • Thread:  M4
In Stock - Despatched 1-2 Days
Centering Pin
ID: FV-MALE
Price:  €24.00
Quick Overview:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
In Stock - Despatched 1-2 Days
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Price:  €1,254.00
Quick Overview: 

The Swift-Fix Starter Kit contains the essential components required for fixture applications on multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Part Number:  FV-STARTERKIT
  • Thread:  M4
  • Application:  Multisensor CMM
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/15
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  15 mm
In Stock - Despatched 1-2 Days
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Price:  €2,530.00
Quick Overview: 

The Swift-Fix Full Kit provides all components required to meet the fixturing needs of multisensor CMMs. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Part Number:  FV-FULLKIT
  • Thread:  M4
  • Application:  Multisensor CMM
In Stock - Despatched 1-2 Days
Flexible Vice
ID: FV-SLIDE
Price:  €420.00
Quick Overview:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Part Number:  FV-SLIDE
  • Thread:  M4
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Price:  €605.00
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200C
  • Thread:  M4
In Stock - Despatched 1-2 Days
Vee Block Single
ID: FV-VEE
Price:  €32.00
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Part Number:  FV-VEE
In Stock - Despatched 1-2 Days
Tension Post (M4)
ID: FV-POST
Price:  €19.00
Quick Overview: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M4 components.

  • Part Number:  FV-POST
  • Thread:  M4
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Price:  €638.00
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200F
  • Thread:  M4
In Stock - Despatched 1-2 Days
Articulated Fixture Arm (M8)
ID: FX-ARM
Price:  €142.00
Quick Overview:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Part Number:  FX-ARM
  • Thread:  M8
In Stock - Despatched 1-2 Days
Slider Block (M4)
ID: FV-SLIDER
Price:  €18.00
Quick Overview:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FV-SLIDER
  • Thread:  M4
In Stock - Despatched 1-2 Days
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Price:  €18.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FV-SO/MAG
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
In Stock - Despatched 1-2 Days
Spring Clamp
ID: FV-SPRING
Price:  €46.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FV-SPRING
  • Thread:  Without Thread
  • Tension Post Compatibility:  FV-POST
In Stock - Despatched 1-2 Days
Resting Cone (M4)
ID: FV-CONE
Price:  €15.00
Quick Overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Price:  €930.00
Quick Overview: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Delivery time 10-15 days
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Price:  €418.00
Quick Overview: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.

  • Part Number:  FC-JS-125SS3-I
Delivery time 10-15 days
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Price:  €474.00
Quick Overview: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.

  • Part Number:  FC-JS-160SS3-I
Delivery time 10-15 days
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Price:  €364.00
Quick Overview: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.

  • Part Number:  FC-JS-70SS3-E
Delivery time 10-15 days
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Price:  €418.00
Quick Overview: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.

  • Part Number:  FC-JS-125SS3-E
Delivery time 10-15 days