Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  €8,550.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery > 25 days
Centering Pin
Centering Pin
ID: FV-MALE
Price:  €24.00
Quick Overview:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Price:  €18.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/30
  • Length:  30 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Price:  €19.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FV-SO/PIN
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Price:  €22.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FX-SO/PIN
  • Length:  20 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Price:  €26.00
Quick Overview:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FX-SLIDER
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Price:  €46.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/200
  • Size:  30 x 30 x 200 mm
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Price:  €19.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/50
  • Length:  50 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Price:  €52.00
Quick Overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
In Stock - Despatched 1-2 Days
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Price:  €129.00
Quick Overview:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Part Number:  FX-CLAMP
  • Thread:  M8
In Stock - Despatched 1-2 Days
Vee Block Single
Vee Block Single
ID: FV-VEE
Price:  €32.00
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Part Number:  FV-VEE
In Stock - Despatched 1-2 Days
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Price:  €46.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FV-SPRING
  • Thread:  M4
In Stock - Despatched 1-2 Days
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Price:  €275.00
Quick Overview:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
  • Part Number:  FX-KINKITPLUS
  • Plate Compatibility :  KB-UNIVL
In Stock - Despatched 1-2 Days
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Price:  €139.00
Quick Overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
In Stock - Despatched 1-2 Days
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Price:  €15.00
Quick Overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  €1,220.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  €1,420.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing (G):  M6
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Price:  €1,140.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Price:  €1,490.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  €560.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Delivery time 10-15 days